Linear guide rail is also commonly known as linear guide rail. The application components of such mechanical equipment belong to fine parts. Therefore, in the case of application, a little inattention will lead to the damage of parts. In the case of actual operation of production and manufacturing, we must adopt a more cautious manufacturing mentality to avoid the damage of linear guide rail due to wrong application.

1、應用規定

1. Application regulations

針對應用的自然環境直線導軌也擁有較為高的應用規定，在大家生產制造的自然環境中，不但有看得清的塵土，還存有一些看不到的塵土，這種塵土一旦掉入到線性導軌中，會出現一些欠佳的應用反映，例如提升滑軌的磨壞度，使機械設備的震動能量增加，還有便是噪聲聲提升等，進而會引發出別的的應用的難題。

According to the natural environment of application, linear guide rail also has relatively high application requirements. In the natural environment of production and manufacturing, there are not only visible dust, but also some invisible dust. Once this dust falls into the linear guide rail, there will be some poor application reflection, such as improving the wear degree of the slide rail, increasing the vibration energy of mechanical equipment, and making it convenient It's noise and sound enhancement, which will lead to other application problems.

2、安裝事宜

2. Installation

針對線性導軌的安裝，也必須仔細認真，在安裝的情況下，不能出現力開展沖壓模具的狀況，也不能應用吊物對滑軌開展安裝和敲打，一旦出現安裝不善的狀況，要采用技術性上的個人行為開展安裝。

For the installation of linear guide rail, we must also be careful. In the case of installation, it is not allowed to carry out the stamping die with super strength, and it is not allowed to use the lifting objects to carry out the installation and knocking on the slide rail. Once the installation is not good, we should use the technical personal behavior to carry out the installation.

3、要避免出現生銹的狀況

3. Rust should be avoided

要避免出現那樣的應用狀況，防止立即的應用兩手取拿那樣的零配件，而恰當的作法便是應用前把自己的兩手清理整潔，除去污垢和汗水，還有便是能夠再直線導軌上擦抹好一些礦物質植物油脂，隨后在開展別的層面的實際操作。尤其是來到濕冷的夏天，一定要搞好防水解決。

To avoid such application situation, first of all, it is necessary to prevent the immediate use of two hands to pick up such spare parts. The proper way is to clean up your hands before application, remove dirt and sweat, and then wipe some mineral vegetable oil on the linear guide rail, and then carry out the actual operation at other levels. Especially in the wet and cold summer, we must do a good job in waterproof.