新聞中心
滾珠絲杠與普通絲杠有什么區別
來源：http://www.zsdress.com/ 日期：2022-09-21 發布人：
1、傳動效率。
1. Transmission efficiency.
滾珠絲杠的傳動效率大約是90~96%，梯形絲杠的傳動效率大約是26~46%。即如果驅動同樣大的負載，采用滾珠絲杠可以使用更小的驅動功率，例如更小功率的電機，既可降低成本，亦可降低能耗。
The transmission efficiency of ball screw is about 90~96%, and that of trapezoidal screw is about 26~46%. That is, if the same load is driven, the ball screw can use less driving power, such as a motor with smaller power, which can reduce both costs and energy consumption.
2、傳動速度。
2. Transmission speed.
滾珠絲杠是滾動摩擦，梯形絲杠是滑動摩擦，工作時前者的溫升遠低于后者，因此可以承擔高速傳動任務。
The ball screw is rolling friction, and the trapezoidal screw is sliding friction. The temperature rise of the former is far lower than the latter when working, so it can undertake high-speed transmission tasks.
3、使用壽命。
3. Service life.
滾動摩擦的表面損傷比滑動摩擦的小很多，因此在清潔、潤滑等條件符合時，滾珠絲杠的維持壽命比梯形絲杠高得多。
The surface damage of rolling friction is much smaller than that of sliding friction, so when the cleaning, lubrication and other conditions are met, the maintenance life of ball screw is much higher than that of trapezoidal screw.
4、自鎖性。
4. Self locking.
自鎖性一般與傳動效率成反比，因此，滾珠絲杠幾乎沒有自鎖性，而梯形絲杠具有一定的自鎖性（視乎導程角的大小和工作面粗糙度）。
The self-locking property is generally inversely proportional to the transmission efficiency. Therefore, the ball screw has almost no self-locking property, while the trapezoidal lead screw has a certain self-locking property (depending on the lead angle and the roughness of the working surface).
5、經濟性。
5. Economy.
從以前和目前的情況看，滾珠絲杠因其結構較梯形絲杠復雜，仍然比梯形絲杠高。不過，隨著自動化設備的增多而產量變大，差異越來越小。
From the previous and current situation, the price of ball screw is still higher than that of trapezoidal screw due to its complex structure. However, with the increase of automation equipment, the output becomes larger and the price difference becomes smaller.
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.zsdress.com
The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.zsdress.com
- 上一篇：同步帶導軌模組與滾珠絲杠導軌的優勢及局限性
- 下一篇：直線線性導軌的基本推動原理
導軌絲杠：從設計結構...<>
大型絲杠的性能設計介...<>
梯形絲杠和滾珠絲杠的...<>- 滾珠絲桿目前的行業的...<>
- 滾珠絲杠螺母油封更換...<>
相關：
