直線導軌是人們常說的線性導軌，這樣的機械使用部件屬于精密的零件，因此，在使用的時候，稍有不慎，會造成零件的損壞，在生產操作的時候，一定要采取比較謹慎的生產態度，避免出現因為使用不正確而造成線性導軌的損壞的狀況。

Linear guide rail is often said to be linear guide rail. Such mechanical components are precision parts. Therefore, when using, a little carelessness will cause damage to parts. In the production operation, we must adopt a more cautious attitude to avoid the damage of linear guide rail caused by incorrect use.

1、使用要求

1. Use requirements

對于使用的環境直線導軌也有著比較高的使用要求，在我們生產的環境中，不僅有看得見的灰塵，還存在一些看不見的灰塵，這些灰塵一旦落入到線性導軌中，會出現一些不良的使用反應，比如說提高導軌的磨損度，使機械的振動力量加大，再有是噪音聲提高等，繼而會引發出其他的使用的問題。

For the use environment, the linear guide rail also has higher requirements. In our production environment, there are not only visible dust, but also some invisible dust. Once these dust fall into the linear guide rail, there will be some adverse reactions, such as improving the wear degree of the guide rail, increasing the vibration force of the machinery, and increasing the noise, It will lead to other use problems.

2、安裝事項

2. Installation matters

對于線性導軌的安裝，也需要認真仔細，在安裝的時候，不可以出現強力進行沖壓的狀況，也不可以使用重物對導軌進行安裝和敲擊，一旦出現安裝不當的狀況，要采取技術上的行為進行安裝。

For the installation of linear guide rail, it is also necessary to be careful. During installation, it is not allowed to press forcefully or use heavy objects to install and knock the guide rail. In case of improper installation, technical actions should be taken for installation.

3、要避免出現銹蝕的狀況

3. Corrosion should be avoided

要避免出現這樣的使用狀況，避免直接的使用雙手取拿這樣的配件，而正確的做法是使用前把自己的雙手清洗干凈，去除污漬和汗液，再有是可以再直線導軌上涂抹好一些礦物油脂，然后在進行其他方面的操作。尤其是到了潮濕的夏季，一定要做好防潮處理。=

To avoid such use, first of all, avoid directly using both hands to take such accessories, and the correct way is to clean your hands before use, remove stains and sweat, and then apply some mineral grease on the linear guide rail, and then carry out other operations. Especially in the humid summer, we must do a good job in moisture-proof treatment. =